Description
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Dimensions
da | 75 | mm | |
db | 85 | mm | |
Ca | 56 | mm | |
Da | 130 | mm | |
Db | 102.5 | mm | |
A | 115 | mm | |
A1 | 80 | mm | |
H | 155 | mm | |
H1 | 80 | mm | |
H2 | 30 | mm | |
J | 230 | mm | |
L | 280 | mm | |
N | 24 | mm | |
N1 | 18 | mm | |
Dowel pins | |||
J6 | 257 | mm | |
J7 | 29 | mm | |
N4 | max. | 8 | mm |
Seal dimensions | |||
A2L | 133 | mm |
Appropriate seals and end cover
TSN 215 A
|
2 x TSN 215 S
|
ASNH 518-615
|
Breaking loads, housing
P0° | 290 | kN | |
P55° | 410 | kN | |
P90° | 250 | kN | |
P120° | 185 | kN | |
P150° | 160 | kN | |
P180° | 205 | kN | |
Pa | 135 | kN |
Yield point, cap bolts
Q120° | 220 | kN | |
Q150° | 125 | kN | |
Q180° | 110 | kN |
Mass
Mass housing | 8.09 | kg |
Mounting information
Cap bolt, size | M 12×70 | |||
Cap bolt, rec. tightening torque | 80 | N·m | ||
Appropriate attachment bolt, size | G | 16 | mm | |
Appropriate attachment bolt, rec. tightening torque | 200 | N·m | ||
Initial grease fill, 20% | 125 | g | ||
Initial grease fill, 40% | 210 | g |
For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน