Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Dimensions

d_a		85	mm
C_a		80	mm
D_a		200	mm
D_b		147.5	mm
A		175	mm
A₁		120	mm
H		242	mm
H₁		125	mm
H₂		45	mm
J		350	mm
L		410	mm
N		32	mm
N₁		26	mm
Dowel pins
J₆		378	mm
J₇		44	mm
N₄	max.	8	mm
Seal dimensions
A_2L		191	mm

Appropriate seals and end cover

TSN 619 C

TSN 619 A

2 x TSN 619 S

ASNH 522-619

Breaking loads, housing

P_0°		600	kN
P_55°		680	kN
P_90°		410	kN
P_120°		310	kN
P_150°		275	kN
P_180°		340	kN
P_a		220	kN

Yield point, cap bolts

Q_120°		620	kN
Q_150°		360	kN
Q_180°		310	kN

Mass

Mass housing

22

kg

Mounting information

Cap bolt, size			M 20×100
Cap bolt, rec. tightening torque			200	N·m
Appropriate attachment bolt, size	G		24	mm
Appropriate attachment bolt, rec. tightening torque			665	N·m
Initial grease fill, 20%			530	g
Initial grease fill, 40%			850	g

For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.

Listing categories ตลับลูกปืนและชุดตลับลูกปืน