@tms1987
02-639-4222
Description
Y-bearing plummer block units
Dimensions
| d | 50 | mm | |
| A | 60 | mm | |
| A1 | 40 | mm | |
| B1 | 59 | mm | |
| H | 126 | mm | |
| H1 | 63.5 | mm | |
| H2 | 24 | mm | |
| J | 171.5 | mm | |
| J | max. | 180 | mm |
| J | min. | 163 | mm |
| L | 219 | mm | |
| N | 28.5 | mm | |
| N1 | 20 | mm | |
| s1 | 32.5 | mm | |
|
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 201 | mm | |
| J7 | 21 | mm | |
| N4 | 4 | mm | |
Calculation data
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.2 | kN | |
| Limiting speed | 3600 | r/min |
Mass
| Mass bearing unit | 3.97 | kg |
Mounting information
| Appropriate spanner | HN 10-11 | |||
| Recommended lock nut tightening angle | α | 90 | ° | |
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
For additional information about the meaning and limitations of the product data, refer to Y-bearing plummer block unitsand Y-bearing units (ball bearing units).
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน
