TOP 5 SKF DISTRIBUTORS IN ASIA

Split plummer block housings, large SNL series for bearings on an adapter sleeve, with standard seals

Dimensions

da 280 mm
d2 418 mm
Ca 180 mm
Da 500 mm
A 350 mm
A1 310 mm
ATS 360 mm
ATK 455 mm
H 591 mm
H1 300 mm
H2 110 mm
J 710 mm
J1 190 mm
L 830 mm
N 50 mm
N1 42 mm
s 22 mm
Shaft end
ba min. 138 mm
ba max. 170 mm
bb 133 mm
bc 175.5 mm
Dowel pins
J6 770 mm
N4 max. 25 mm
Appropriate seals and end cover

Labyrinth seal
2 x TS 60
Taconite seal
2 x TK 60
End cover
ETS 60
Breaking loads, housing

P 4800 kN
P55° 6000 kN
P90° 2900 kN
P120° 2200 kN
P150° 1900 kN
P180° 2400 kN
Pa 1500 kN
Yield point, cap bolts

Q120° 2860 kN
Q150° 1650 kN
Q180° 1430 kN
Mass

Mass housing 301 kg
Mounting information

Cap bolt, size M 30×220
Cap bolt, rec. tightening torque 400 N·m
Appropriate attachment bolt, size G 36 mm
Appropriate attachment bolt, rec. tightening torque 2280 N·m
Eye bolt, size
2 x M 30
Initial grease fill, 20% 4 kg
Initial grease fill, 40% 6.2 kg

For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL 30, 31 and 32 series and Overview, selection and application recommendations.