Description
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Dimensions
da | 19.05 | mm | |
Ca | 25 | mm | |
Da | 52 | mm | |
Db | 31.5 | mm | |
A | 67 | mm | |
A1 | 46 | mm | |
H | 74 | mm | |
H1 | 40 | mm | |
H2 | 19 | mm | |
J | 130 | mm | |
L | 165 | mm | |
N | 20 | mm | |
N1 | 15 | mm | |
Dowel pins | |||
J6 | 152 | mm | |
J7 | 16 | mm | |
N4 | max. | 5 | mm |
Seal dimensions | |||
A2L | 80 | mm |
Appropriate seals and end cover
TSN 505 C
|
TSN 505 A
|
2 x TSN 505 SE
|
ASNH 505
|
Breaking loads, housing
P0° | 100 | kN | |
P55° | 155 | kN | |
P90° | 95 | kN | |
P120° | 70 | kN | |
P150° | 60 | kN | |
P180° | 80 | kN | |
Pa | 52 | kN |
Yield point, cap bolts
Q120° | 150 | kN | |
Q150° | 85 | kN | |
Q180° | 75 | kN |
Mass
Mass housing | 1.45 | kg |
Mounting information
Cap bolt, size | M 10×40 | |||
Cap bolt, rec. tightening torque | 50 | N·m | ||
Appropriate attachment bolt, size | G | 12 | mm | |
Appropriate attachment bolt, rec. tightening torque | 80 | N·m | ||
Initial grease fill, 20% | 15 | g | ||
Initial grease fill, 40% | 25 | g |
For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน