Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Dimensions

d_a		57.15	mm
C_a		58	mm
D_a		140	mm
D_b		92.5	mm
A		120	mm
A₁		90	mm
H		177	mm
H₁		95	mm
H₂		32	mm
J		260	mm
L		315	mm
N		28	mm
N₁		22	mm
Dowel pins
J₆		288	mm
J₇		33	mm
N₄	max.	8	mm
Seal dimensions
A_2L		138	mm

Appropriate seals and end cover

TSN 613 CE

TSN 613 A

2 x TSN 613 SE

ASNH 516-613

Breaking loads, housing

P_0°		350	kN
P_55°		430	kN
P_90°		260	kN
P_120°		190	kN
P_150°		175	kN
P_180°		215	kN
P_a		140	kN

Yield point, cap bolts

Q_120°		220	kN
Q_150°		125	kN
Q_180°		110	kN

Mass

Mass housing

9.5

kg

Mounting information

Cap bolt, size			M 12×70
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		20	mm
Appropriate attachment bolt, rec. tightening torque			385	N·m
Initial grease fill, 20%			170	g
Initial grease fill, 40%			280	g

For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.

Listing categories ตลับลูกปืนและชุดตลับลูกปืน