Description
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Dimensions
da | 88.9 | mm | |
Ca | 86 | mm | |
Da | 215 | mm | |
Db | 157.5 | mm | |
A | 185 | mm | |
A1 | 120 | mm | |
H | 271 | mm | |
H1 | 140 | mm | |
H2 | 45 | mm | |
J | 350 | mm | |
L | 410 | mm | |
N | 32 | mm | |
N1 | 26 | mm | |
Dowel pins | |||
J6 | 378 | mm | |
J7 | 44 | mm | |
N4 | max. | 8 | mm |
Seal dimensions | |||
A2L | 199 | mm |
Appropriate seals and end cover
TSN 620 C
|
TSN 620 A
|
2 x TSN 620 SE
|
ASNH 524-620
|
Breaking loads, housing
P0° | 800 | kN | |
P55° | 790 | kN | |
P90° | 470 | kN | |
P120° | 350 | kN | |
P150° | 320 | kN | |
P180° | 400 | kN | |
Pa | 260 | kN |
Yield point, cap bolts
Q120° | 620 | kN | |
Q150° | 360 | kN | |
Q180° | 310 | kN |
Mass
Mass housing | 26.2 | kg |
Mounting information
Cap bolt, size | M 20×110 | |||
Cap bolt, rec. tightening torque | 200 | N·m | ||
Appropriate attachment bolt, size | G | 24 | mm | |
Appropriate attachment bolt, rec. tightening torque | 665 | N·m | ||
Initial grease fill, 20% | 630 | g | ||
Initial grease fill, 40% | 1000 | g |
For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน