Description
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Dimensions
da | 125 | mm | |
Ca | 98 | mm | |
Da | 250 | mm | |
Db | 177.5 | mm | |
A | 205 | mm | |
A1 | 150 | mm | |
H | 302 | mm | |
H1 | 150 | mm | |
H2 | 50 | mm | |
J | 420 | mm | |
L | 500 | mm | |
N | 42 | mm | |
N1 | 35 | mm | |
Dowel pins | |||
J6 | 458 | mm | |
J7 | 54 | mm | |
N4 | max. | 12 | mm |
Seal dimensions | |||
A2L | 223 | mm | |
A2T | 285 | mm | |
d2 | 224 | mm |
Appropriate seals and end cover
TSN 528 C
|
TSN 528 L
|
TSN 528 A
|
2 x TSN 528 S
|
2 x TK 528
|
ASNH 528
|
Breaking loads, housing
P0° | 1000 | kN | |
P55° | 1050 | kN | |
P90° | 630 | kN | |
P120° | 470 | kN | |
P150° | 430 | kN | |
P180° | 530 | kN | |
Pa | 345 | kN |
Yield point, cap bolts
Q120° | 900 | kN | |
Q150° | 520 | kN | |
Q180° | 450 | kN |
Mass
Mass housing | 40 | kg |
Mounting information
Cap bolt, size | M 24×130 | |||
Cap bolt, rec. tightening torque | 350 | N·m | ||
Appropriate attachment bolt, size | G | 30 | mm | |
Appropriate attachment bolt, rec. tightening torque | 1310 | N·m | ||
Initial grease fill, 20% | 900 | g | ||
Initial grease fill, 40% | 1400 | g |
For additional information about the meaning and limitations of the product data, refer to Split plummer block housings, SNL and SE 2, 3, 5 and 6 series and Overview, selection and application recommendations.
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน