@tms1987
02-639-4222
Description
Y-bearing plummer block units
Dimensions
| d | 25 | mm | |
| A | 42 | mm | |
| A1 | 27 | mm | |
| B1 | 38 | mm | |
| H | 82 | mm | |
| H1 | 42.9 | mm | |
| H2 | 16 | mm | |
| J | 118 | mm | |
| J | max. | 125 | mm |
| J | min. | 111 | mm |
| L | 165 | mm | |
| N | 24 | mm | |
| N1 | 17 | mm | |
| s1 | 22.5 | mm | |
|
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 155 | mm | |
| J7 | 15 | mm | |
| N4 | 4 | mm | |
Calculation data
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed | 6300 | r/min |
Mass
| Mass bearing unit | 1.23 | kg |
Mounting information
| Appropriate spanner | HN 5-6 | |||
| Recommended lock nut tightening angle | α | 95 | ° | |
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.562 | in | |
For additional information about the meaning and limitations of the product data, refer to Y-bearing plummer block unitsand Y-bearing units (ball bearing units).
Details
- Listing categories ตลับลูกปืนและชุดตลับลูกปืน
