Y-bearing plummer block units

Dimensions

d		35	mm
A		49	mm
A₁		31	mm
B₁		46	mm
H		99	mm
H₁		49.2	mm
H₂		18	mm
J		136.5	mm
J	max.	145	mm
J	min.	128	mm
L		184	mm
N		25.5	mm
N₁		17	mm
s₁		27.5	mm
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position).
Threaded hole
R_G		1/4-28 UNF
R₁		3.5	mm
R_α		45	°
Grease fitting
D_N		6.5	mm
SW_N		7	mm
G_N		1/4-28 SAE-LT
Dowel pins
J₆		170	mm
J₇		17.5	mm
N₄		4	mm

Calculation data

Mass

Mass bearing unit

2.17

Mounting information

Appropriate spanner		HN 8-9
Recommended lock nut tightening angle	α	105	°
Recommended diameter for attachment bolts, mm	G	14	mm
Recommended diameter for attachment bolts, inch	G	0.562	in

Appertaining products

For additional information about the meaning and limitations of the product data, refer to Y-bearing plummer block unitsand Y-bearing units (ball bearing units).

SYJ 40 KF